| Technics turntables |
 rob@dynamic |
Hi all,
I'm modeling some turntables during my lunch breaks to practice my modeling, about 1hrs work so far.
Added W.I.P. pics to blog site to save uploading to two places.
Any comments appreciated.
I'm going to tackle the arm tomorrow which i think is going to test my modeling skills.
W.I.P images found here:
http://kineorob.blogspot.com/
Thanks,
Rob
3D Portfolio
Blog
Facebook
Twitter
Flickr
read 1392 times
9/9/2010 4:43:52 PM (last edit: 9/9/2010 4:43:52 PM)
|
| rob@dynamic |
Added update images to here so people can see straight off. About 2hrs work in total, today added last few buttons, started on the arm, and did quick mat test for the matte plastic and metal i'll be using for some parts.
Any crits/comments would be much appreciated...
In the second image you can see the rivets going all around the plate, however they don't all show up when camera zoomed out (top image) any ideas why?
Check the blog for all updates,
Thanks
Rob
3D Portfolio
Blog
Facebook
Twitter
Flickr
read 1349 times
9/10/2010 3:59:45 PM (last edit: 9/10/2010 4:55:19 PM)
|
| mrgrotey |
Cant crit as work blocks blogs (and images hotlinked from blogs). Cant you just post them here from photobucket?
read 1340 times
9/10/2010 4:52:06 PM (last edit: 9/10/2010 4:52:30 PM)
|
| rob@dynamic |
|
yep no probs, there you go...
3D Portfolio
Blog
Facebook
Twitter
Flickr
read 1334 times
9/10/2010 5:04:32 PM (last edit: 9/10/2010 5:04:32 PM)
|
| DannyMax |
looking good so far :) keep at it
read 1327 times
9/10/2010 5:16:24 PM (last edit: 9/10/2010 5:16:24 PM)
|
| rob@dynamic |
Cheers danny, will do.
Anyone got any ideas re. The issue I'm havin with the circula rivets on the plate in the top image?
Thanks
3D Portfolio
Blog
Facebook
Twitter
Flickr
read 1276 times
9/10/2010 8:29:34 PM (last edit: 9/10/2010 8:29:34 PM)
|
| rob@dynamic |
Cheers danny, will do.
Anyone got any ideas re. The issue I'm havin with the circula rivets on the plate in the top image?
Thanks
3D Portfolio
Blog
Facebook
Twitter
Flickr
read 1276 times
9/10/2010 8:29:36 PM (last edit: 9/10/2010 8:29:36 PM)
|
| rob@dynamic |
Sorry for the bump guys, but can anyone shed any light on whats happening with the plate rivets?
I'm really struggling to figure it out, I can't think what it can be?
3D Portfolio
Blog
Facebook
Twitter
Flickr
read 1234 times
9/13/2010 10:56:29 AM (last edit: 9/13/2010 10:56:29 AM)
|
| mrgrotey |
Render a close up image if you can so we can see it better.
Are the dots partcles? physical mesh? do they all have the same material? are they on a layer that doesnt render?
read 1228 times
9/13/2010 11:16:06 AM (last edit: 9/13/2010 11:16:31 AM)
|
| rob@dynamic |
The second image (Clay render) shows them up close. When I render up close they render fine, it's only when I render from a distance that some of them don't show up.
They are physical meshes, all the same material and all on a render-able layer.
I created them by simply copying a cylinder around a central pivot point.
I've highlighted in the image below, where they errors are occuring:
Thanks
3D Portfolio
Blog
Facebook
Twitter
Flickr
read 1225 times
9/13/2010 11:19:12 AM (last edit: 9/13/2010 11:21:57 AM)
|
| BishBashRoss |
Is the model to scale?
Maxing and Relaxing
read 1220 times
9/13/2010 11:26:20 AM (last edit: 9/13/2010 11:26:20 AM)
|
| rob@dynamic |
|
yep it's to scale
3D Portfolio
Blog
Facebook
Twitter
Flickr
read 1218 times
9/13/2010 11:27:33 AM (last edit: 9/13/2010 11:27:33 AM)
|
| ScotlandDave |
Wierd. I take it they definitely ARE there and haven`t been inadvertently selected and moved around or whatever.. Have you tried switching render method/engine?
Old Portfolio Madness
read 1203 times
9/13/2010 1:08:50 PM (last edit: 9/13/2010 1:09:09 PM)
|
| rob@dynamic |
|
yea it's a strange one. Yep they def are there. I've not try'd switching render engine, as the material and lights are MR. I've tryed upping the samples as thought may have something to do with it but no luck.
3D Portfolio
Blog
Facebook
Twitter
Flickr
read 1203 times
9/13/2010 1:12:16 PM (last edit: 9/13/2010 1:12:16 PM)
|
| rob@dynamic |
A few more updates.
Another hours work today over lunch break.
Worked a bit more on the arm, and arm housing. Plus a few minor tweaks to the shell mesh, to accommodate the arm housing.
I still can't figure out whats going on the the circular rivets, they aren't even all showing up with a close up render now (see bottom image). Any suggestions welcome...
Thanks
Rob
3D Portfolio
Blog
Facebook
Twitter
Flickr
read 1193 times
9/13/2010 4:24:55 PM (last edit: 9/13/2010 4:24:55 PM)
|