Help & Feedback
Work in progress
Indespensible MaxScripts, Plugins and 3rd Party Tools
The allmighty FREE Resources Thread !
Maxforums member photo gallery index
Maxforums Member Tutorials
three cheers to maxforums...
101 Things you didnt know in Max...
A Face tutorial from MDB101 :D
Maxforums.org Members Gallery
SON OF POST YOURSELF
Dub's Maxscript Tutorial Index
Maxunderground news unavailable
I am modeling this tong"
" and that's what i have done"
The gap and the back curve is need to be modified a bit. But what i am confused about is "
" the highlighted area is pulled up? like is it shallow from inside?and yeah i am talking about the 1st two models, leave the third one.
How you guys would start this? I have this reference image only.
read 358 times
1/14/2015 12:20:39 PM (last edit: 1/14/2015 12:21:26 PM)
read 353 times
1/14/2015 12:42:03 PM (last edit: 1/14/2015 12:42:03 PM)
But don't you think it is flat here and urs is turned?
read 337 times
1/14/2015 2:44:32 PM (last edit: 1/14/2015 2:44:58 PM)
It's bent there; just flatter. This is all very easy to work out, just look at the reference. The pic I provided was just showing the workflow.
read 333 times
1/14/2015 3:19:24 PM (last edit: 1/14/2015 3:19:24 PM)
i think you're wrong here herf- looks like to me that it's a single piece of metal bent at the 'hinge' and contoured towards the part where food is held- flat bottom and curved top- like half of what you made- 4 points instead of 7 on the top bit
if you look at the right hand side you can see the 180' bend
you could be right though- the ref is pretty bad
read 328 times
1/14/2015 3:51:52 PM (last edit: 1/14/2015 3:51:52 PM)
Of course it's one piece of metal with a 180 bend. But at no point is the surface 100% flat, there's always a contour.
read 321 times
1/14/2015 4:55:11 PM (last edit: 1/14/2015 4:55:11 PM)
Thanks guys, i think my second model need a bit more bending at right side and pulling up the top vertices then maybe it looks fine :D
read 310 times
1/14/2015 8:48:24 PM (last edit: 1/14/2015 8:48:24 PM)
It looks nothing like a thong.
read 298 times
1/15/2015 9:51:18 AM (last edit: 1/15/2015 9:51:18 AM)
lol @ thong
read 290 times
1/15/2015 11:21:46 AM (last edit: 1/15/2015 11:21:46 AM)
Open chat window